Influence of Welding Current and Welding Speed on Tig Welding of Aluminium Plate

Main Article Content

Vineeta Tiwari
Mukesh Kumar

Abstract

in this research work an automated TIG welding setup was made and welding is performed on 3 mm thick aluminium plate. Welding parameters such as welding speed and current are changed to get a better strength joint and for this reason only welding is done on both the sides of aluminium plate. The tensile strength of the obtained weld joint, microstructure and micro hardness of weld pool was analysed by changing welding speed and current applied

Article Details

How to Cite
Tiwari, V., & Kumar, M. (2019). Influence of Welding Current and Welding Speed on Tig Welding of Aluminium Plate. International Journal on Recent Technologies in Mechanical and Electrical Engineering, 6(6), 13–18. Retrieved from https://www.ijrmee.org/index.php/ijrmee/article/view/337
Section
Articles